koyker loader loaders mounting brackets

Front End Loader Mounts For Koyker Loaders

Check the tractor manufacturers below for your tractor make. Click on the manufacturer to see what model tractors that Koyker makes front end loader mounting brackets for. If more than one loader model will fit your specific tractor give us a call and we can help you decide which loader model is the right one for your application.

If you do not see a loader listed for your tractor give us a call. Koyker adds tractor models to there line up on an ongoing basis. Identical tractors are also sold under different names and we can see if there is a front end loader for another tractor make and model that will fit your tractor. If by chance we cannot fit your tractor with a direct bolt on bracket. Koyker manufactures a loader mount starter kit. This mount is applicable to tractors 35 horsepower and under. Go here to see the different loader specifications. Koyker manufactures starter kits for the Model 80 front end loaders, the model 120 front end loader, the model 140 front end loader, the model 155 front end loader and the model 160 front end loader.

All of the Koyker front end loaders from the model 210 and larger are equipped with quick attach buckets as well as the loader being quick attach as well. These front end loaders will accept several loader options like hay bale spears, pallet forks, materials buckets etc. The front end loader models smaller than the model 210 quick attach to the tractor as well, but do not offer quick attach buckets. Some of the same attachments are offered for the smaller loaders but must be bolted into place. See all of the bucket options here.

Some of the mounting kits offer a hose kit that will complete the front end loader installation process. The mounting kits that do not offer hose kits will require you to have two hoses made that will connect the tractor remotes to the loader valve. If you know how long these hoses need to be we can provide these hoses as well.

There are several control valve options for Koyker front end loaders. You can get a two handled control valve (most economical), a single joystick control valve ( $75.00-$125.00 upgrade). For tractors with a cab, we can offer you a cable mounted joystick control that will ease the loader installation by allowing you to mount the valve and all of its hoses outside of the cab and only the joystick will be mounted inside of the cab (Please tell us when you have a cab tractor). A three spool valve is also available to control remote accessories. If you have an older tractor with a low G.P.M. flow rate on the hydraulic pump, we offer a control valve for them as well.

Koyker offers several bucket widths for each of its front end loader models. This is another case where bigger is not always better. The best way to size a loader bucket for general all around work is to get a bucket wide enough to extend just past the outside width of the front tires. Large materials buckets are also available for moving less dense material like bark, or mulch. See the bucket options for each loader at Koyker loader bucket options .

Click on the manufacturer below to show the tractors models that Koyker makes front end loaders brackets for.

Agco Agco-Allis Agco-White Agracat Allied Allis Chalmers Belarus Benye Branson Case Case-IH Cub Cadet Century David Brown Deutz Duetz-Allis Dong Feng Dragon Eicher Emerybuilt Farmpro Farm System Farmall Ford/New Holland Foton Futian Hardy Diesel Hinomoto Hurlimann International Iseki Iron Horse Jinma John Deere Kama Kioti Kodiak Kubota Lenar Leyland/Marshall Long Lyntrac Mahindra Massey Ferguson Mccormick Memo Millennium Mitsubishi Montana New Holland Oliver Rhino Ringo Ringo Star S.A.M.E. Scorpion Shakti Shenniu Shibaura Tafe Task Master Terra Cyclone Terraplane Tiger Tractor King TYM Trojan Valtra Valmet Wheel Ox White Woody Yanmar Zetor Zetor Zebra