Starter Mounting kit Specifications  for Koyker Front End Loaders.

Here are the specifications for the front end loader mounting starter kits. The loader models that kits are available for are the 80, 120, 140, 155, 160. The model 50 should be available soon. Look on our loader specifications page and find what hp range each loader will serve. When matching the front end loader to a tractor take note of the width of the body of the tractor including the exhaust. Also note the recommended height of the back of the loader frame to the ground, as well the length from the front bumper mount to the loader control arms ( Most tractors have a bolt pattern on the side of the case around where the engine bolts to the bell housing, use these bolt holes as a measuring point for the control arms.).  Measure this carefully, especially on the sub compacts. Make sure that you turn the front tires in both directions while pivoting the front axel to check for clearance. If you have questions about the measuring process please contact us for help. Please read our Front end loader installation guide it covers the direct bolt on applications, but will be similar to the starter kits once the belly bracket has been fabricated to match the tractor.

       Koyker model 80 Mounting starter kit specifications.

     Koyker model 120 Mounting starter kit specifications.

    Koyker model 140/160 mounting starter kit specifications.

  Koyker model 155 mounting starter kit specifications.